How to install the LED waterproof light?

LED waterproof light is a kind of LED light with a waterproof function. After purchasing the LED waterproof light, do not rush to install it. You should first understand its installation method and precautions before operating. Next, I will tell you how to install the LED waterproof light. Here are some answers.

Here is the content list:

l Led waterproof light installation method.

l Precautions for the installation of LED waterproof lights.

l Maintenance of LED waterproof light.

Led waterproof light installation method.

First, the LED waterproof light bar refers to the assembly of LEDs on a ribbon-shaped FPC (flexible circuit board) or PCB rigid board. Their general models are about 5730, 5050, 3528, and other common types. Second, the four-line LED waterproof light has a width of about 22mm, a thickness of about 8mm, and a weight of about 0.25kg/m (4 meters per kilogram). Third, the four-wire LED waterproof light strip has four wires, three rows of lights (not four rows of lights), each row of 1 meter 24 lights, 24*3=72. Because the power of each light bead is 0.05W, the power of the 72-bead LED strip is 72*0.05=3.6W. Fourth, when installing the LED waterproof light, if it is normally placed in the light trough, it can be installed straight, and it can be fixed with a string or thin iron wire. But if you want to install the LED waterproof light outside or vertically, you need to purchase a clip and tail plug separately. The original clip is fully transparent, it is best to put waterproof glass glue on the tail plug and plug after installation so that the waterproof function is better.

In addition, we also provide LED Tri-proof Light, LED Fluorescent Light, etc.

Precautions for the installation of LED waterproof lights.

First, the light strip of the LED waterproof light must wear a plug (the plug is equipped with a transformer). The connection of the LED waterproof light must be removed from the transparent plastic cover. After connecting it, try waiting and then cover it. LED waterproof light cannot be connected directly, it is easy to short circuit. Second, the LED waterproof light has a "reaming cut" mark per meter, and it can only be cut off at the mark. Wrong cutting or cutting will result in a one-meter non-lighting. Some will miss the mark because of the mark. It is best to carefully look at the position of the mark before cutting it, and cut it according to the location where there is no connection in the center.

Maintenance of LED waterproof light.

First, before cleaning the LED waterproof light, you need to turn off the light. The light shade of the LED waterproof light should be gently cleaned with a clean cotton cloth. When cleaning the bulb, remove it and wipe it, and don’t use too much force when wiping it. Second, when using the LED waterproof light daily, don't hang things on the LED waterproof light or use it to dry clothes, etc., don't fiddle with and switch frequently, otherwise, the life of the LED waterproof light will be affected. Third, if the LED waterproof light has been used for a long time, we need to pay attention to see if the LED waterproof light has aged, the color of the bulb of the LED waterproof light, etc., so that if this situation occurs, replace the new LED waterproof light in time Light bulb.

Our official website is https://www.yuanhui-lighting.com/. If you are engaged in LED waterproof light-related work or want to learn more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone.